Free sample for Resin 3d Printer Egypt - Print material-exquisite white-8006 – Digital Manufacturing

Short Description:

Product Detail

Product Tags

Feedback (2)

Which has a positive and progressive attitude to customer's desire, our corporation constantly improves our merchandise quality to satisfy the desires of consumers and further focuses on safety, reliability, environmental demands, and innovation of Best 3d Printing Machine, 3d Laser Scanner Price, Impressora 3d Sla, We are devoted to provide professional purification technology and solutions for you!

Free sample for Resin 3d Printer Egypt - Print material-exquisite white-8006 – Digital Manufacturing Detail:

3D Printing Materials

Exquisite white-8006

Introduction of 3D Printing Materials

Characteristics

SZUV-W8006??

PRODUCT DESCRIPTION?

SZUV-W8006?is an ABS like SL resin which has accurate and durable features. It is designed for solid state SLA platforms.?SZUV-W8006?can be applied in master patterns, concept models, general parts and functional prototypes in the?field of automotive, medical and consumer electronics industries.The parts duability building with SZUV-W8006?is over 6.5months.SZUV-W8006

TYPICAL FEATURES

-Liquid resin`s medium viscosity, so easy recoating, easy clean parts and machines

-Improved strength retained, improved dimensions retention of parts in humid condition

-need minimal part finishing

-Long shelf life in machine

TYPICAL BENEFITS

-Need less part finishing time,easier post-curing

-Buliding accurate and high tough parts with an improved dimensional stability

-High quality controls for vacuum casting parts

-Low shrink and good resistance to yellowing

-Magnificent white color

-Outstanding machinable SLA material

Physical Properties – Liquid Material?

Appearance	White
Density	1.13g/cm³?@ 25 ℃
Viscosity	376?cps @ 27?℃
Dp	0.148?mm
Ec	7.8?mJ/cm²
Building layer thickness	0.1mm

?Mechanical Properties of Post-Cured Material?

MEASUREMENT	TEST METHOD	VALUE
		90-minute UV post-cure
Hardness, Shore D	ASTM D 2240	87
Flexural modulus, Mpa	ASTM D 790	2,592-2,675
Flexural strength, Mpa	ASTM D 790	70- 75
Tensile modulus, MPa	ASTM D 638	2,599-2,735
Tensile strength, MPa	ASTM D?638	39-56
Elongation at break	ASTM D 638	13?-20%
Poisson`s Ratio	ASTM D 638	0.4-0.43
Impact strength notched Izod, J/m	ASTM D 256	35?- 45
Heat deflection temperature, ℃	ASTM D 648 @66PSI	62
Glass transition,Tg，℃	DMA，E”peak	73
Coefficient of thermal expension, /℃	TMA(T<Tg)	95*E-6
Density, g/cm³		1.16
Dielectric Constant?60 Hz	ASTM D 150-98	4.6
Dielectric Constant?1 kHz	ASTM D 150-98	3.9
Dielectric Constant?1 MHz	ASTM D 150-98	3.6
Dielectric?StrengthkV/mm	ASTM D 1549-97a	14.9

?Note: the temperature of szuv-w8006 should not be too high. Please use it below 25c.Recommended temperature for use and preservation is 18-25 ℃

Fire Fighting Measures

（1） extinguishant

?Dry powder fire extinguishing agent, alcohol resistant foam extinguishing agent, carbon dioxide, dry sand, spray water.

（2） Special risk

?Fires may produce irritation and harmful gas

（3） The firemen of protective measures

?Fireman should wear protective appliances (eye protection, protective clothing, mailing gas with gas mask, etc.), put out the fire in the windward.

6.?Accidental Release Measures

（1） Homework personnel protective equipment

?Ensure adequate ventilation, wear suitable protective clothing, make a good job in hand and eye/face protection.

（2） Environmental protection measures

?Prevent products from entering the drain or open water

（3） Cleaning method

?For a small amount of leakage, use dry sand, soil and towels absorb the residual liquid, recycling and airtight container.

?For a large number of leakage, leakage of liquid can be in front of the embankment, the introduction of recycle to safe place.

（4） Secondary hazard prevention measures

?Quickly remove all fire spark (ban on smoking in nearby, and the ignition).

7.?Handling And Storage

（1） Operation treatment technical measures

?Avoid contact with eyes, skin and clothing. Don’t inhaling mist or steam, don’t accidentally swallow, keep container tightly closed after the thorough cleaning.

（2） Partial or full ventilation???Maintain adequate ventilation

（3） Safe handling matters needing attention???No?smoke, no fire

（4） Safe storage conditions

?Stored in a cool, well ventilated place, away from heat, sparks and flames. Keep container tightly closed until it is put into use.

（5） packaging container and material

?In the process of custody, please do not transfer to other containers. Don’t fall back to the original containers of products that will be used.

Cases

SOME OF MY PROJECTS

btn12
btn7
汽車配件
包裝設計
藝術設計
醫療領域

Education

Rapid prototype

Auto Parts

Constructional design

Art Design

Medical

Product detail pictures:

Related Product Guide:
Rocket Lab Successfully Launches First NASA Mission with 3D-Printed Rocket > ENGINEERING.com | Handheld 3d Scanner Review
South Africa has the world’s biggest 3D printer | Most Expensive 3d Printer

We goal to understand excellent disfigurement from the manufacturing and supply the top support to domestic and abroad clients wholeheartedly for Free sample for Resin 3d Printer Egypt - Print material-exquisite white-8006 – Digital Manufacturing , The product will supply to all over the world, such as: Wellington, Costa rica, Romania, Our products have won an excellent reputation at each of the related nations. Because the establishment of our firm. we have insisted on our production procedure innovation together with the most recent modern day managing method, attracting a sizable quantity of talents within this industry. We regard the solution good quality as our most vital essence character.

3d Laser Scanner For Small Parts