Massive Selection for Go Scan Portable 3d Scanner - Print material-exquisite white-8006 – Digital Manufacturing

Short Description:

Product Detail

Product Tags

Feedback (2)

We retain bettering and perfecting our merchandise and service. At the same time, we do the job actively to do research and improvement for Form 2 3d Printer Price, Leica 3d Scanner Price, India Chip Sla 3d Printer, We're going to continually strive to improve our provider and give the very best high quality products and solutions with aggressive charges. Any inquiry or comment is really appreciated. Please get hold of us freely.

Massive Selection for Go Scan Portable 3d Scanner - Print material-exquisite white-8006 – Digital Manufacturing Detail:

3D Printing Materials

Exquisite white-8006

Introduction of 3D Printing Materials

Characteristics

SZUV-W8006??

PRODUCT DESCRIPTION?

SZUV-W8006?is an ABS like SL resin which has accurate and durable features. It is designed for solid state SLA platforms.?SZUV-W8006?can be applied in master patterns, concept models, general parts and functional prototypes in the?field of automotive, medical and consumer electronics industries.The parts duability building with SZUV-W8006?is over 6.5months.SZUV-W8006

TYPICAL FEATURES

-Liquid resin`s medium viscosity, so easy recoating, easy clean parts and machines

-Improved strength retained, improved dimensions retention of parts in humid condition

-need minimal part finishing

-Long shelf life in machine

TYPICAL BENEFITS

-Need less part finishing time,easier post-curing

-Buliding accurate and high tough parts with an improved dimensional stability

-High quality controls for vacuum casting parts

-Low shrink and good resistance to yellowing

-Magnificent white color

-Outstanding machinable SLA material

Physical Properties – Liquid Material?

Appearance	White
Density	1.13g/cm³?@ 25 ℃
Viscosity	376?cps @ 27?℃
Dp	0.148?mm
Ec	7.8?mJ/cm²
Building layer thickness	0.1mm

?Mechanical Properties of Post-Cured Material?

MEASUREMENT	TEST METHOD	VALUE
		90-minute UV post-cure
Hardness, Shore D	ASTM D 2240	87
Flexural modulus, Mpa	ASTM D 790	2,592-2,675
Flexural strength, Mpa	ASTM D 790	70- 75
Tensile modulus, MPa	ASTM D 638	2,599-2,735
Tensile strength, MPa	ASTM D?638	39-56
Elongation at break	ASTM D 638	13?-20%
Poisson`s Ratio	ASTM D 638	0.4-0.43
Impact strength notched Izod, J/m	ASTM D 256	35?- 45
Heat deflection temperature, ℃	ASTM D 648 @66PSI	62
Glass transition,Tg，℃	DMA，E”peak	73
Coefficient of thermal expension, /℃	TMA(T<Tg)	95*E-6
Density, g/cm³		1.16
Dielectric Constant?60 Hz	ASTM D 150-98	4.6
Dielectric Constant?1 kHz	ASTM D 150-98	3.9
Dielectric Constant?1 MHz	ASTM D 150-98	3.6
Dielectric?StrengthkV/mm	ASTM D 1549-97a	14.9

?Note: the temperature of szuv-w8006 should not be too high. Please use it below 25c.Recommended temperature for use and preservation is 18-25 ℃

Fire Fighting Measures

（1） extinguishant

?Dry powder fire extinguishing agent, alcohol resistant foam extinguishing agent, carbon dioxide, dry sand, spray water.

（2） Special risk

?Fires may produce irritation and harmful gas

（3） The firemen of protective measures

?Fireman should wear protective appliances (eye protection, protective clothing, mailing gas with gas mask, etc.), put out the fire in the windward.

6.?Accidental Release Measures

（1） Homework personnel protective equipment

?Ensure adequate ventilation, wear suitable protective clothing, make a good job in hand and eye/face protection.

（2） Environmental protection measures

?Prevent products from entering the drain or open water

（3） Cleaning method

?For a small amount of leakage, use dry sand, soil and towels absorb the residual liquid, recycling and airtight container.

?For a large number of leakage, leakage of liquid can be in front of the embankment, the introduction of recycle to safe place.

（4） Secondary hazard prevention measures

?Quickly remove all fire spark (ban on smoking in nearby, and the ignition).

7.?Handling And Storage

（1） Operation treatment technical measures

?Avoid contact with eyes, skin and clothing. Don’t inhaling mist or steam, don’t accidentally swallow, keep container tightly closed after the thorough cleaning.

（2） Partial or full ventilation???Maintain adequate ventilation

（3） Safe handling matters needing attention???No?smoke, no fire

（4） Safe storage conditions

?Stored in a cool, well ventilated place, away from heat, sparks and flames. Keep container tightly closed until it is put into use.

（5） packaging container and material

?In the process of custody, please do not transfer to other containers. Don’t fall back to the original containers of products that will be used.

Cases

SOME OF MY PROJECTS

btn12
btn7
汽車配件
包裝設計
藝術設計
醫療領域

Education

Rapid prototype

Auto Parts

Constructional design

Art Design

Medical

Product detail pictures:

Related Product Guide:
3ders.org | Handheld 3d Scanner Review
The Chunker “chunk-based slicer” proposed for cobot 3D printing | 3d Printing Rapid Prototype

We always stick to the principle "Quality First, Prestige Supreme". We are fully committed to providing our clients with competitively priced quality products, prompt delivery and professional service for Massive Selection for Go Scan Portable 3d Scanner - Print material-exquisite white-8006 – Digital Manufacturing , The product will supply to all over the world, such as: South Korea, Bulgaria, kazan, With strong technical strength and advanced production equipment, and SMS people purposefully , professional, dedicated spirit of enterprise. Enterprises took the lead through the ISO 9001:2008 international quality management system certification, CE certification EU ; CCC.SGS.CQC other related product certification. We look forward to reactivating our company connection.

3d Printing Rapid Prototype