Resin SZUV-T1120-yepamusoro tembiricha kuramba
General Sumo
Hunhu:
SZUV -T1120 ndeyeyero SL resin iyo isina kuenzana nekupisa kwekuita. Inogona kumira tembiricha inodarika 200 ℃ nenguva pfupi uye 120 ℃ panguva yakareba. Yakagadzirirwa kubata akasiyana siyana ekushisa kwepamusoro uye yakashata yekuyedza maapplication.
Mamiriro ezvinhu
KUSIMBA KWAKURU uye KUPIGWA KWAKANAKA
SZUV-T1120 inogona kusimudza humidity, mvura uye zvinonyungudutsa, senge peturu, transmission fluid, mafuta uye inotonhorera. Nekupisa kwayo kusingaenzaniswi, inokodzera kuyerera, HVAC, mwenje, zvishandiso, kuumba uye mhepo tunnel yekuyedza maapplication.
- GADZIRA ZVAKANAKA uye GADZIRA NEKUKAMBIRA
Nekupa kukurumidza kubuda uye zvikamu zvine nzvimbo yakatsetseka, iri nyore kubata-bata, SZUV-T1120 inogona kupedzisa purojekiti yako kubva pakudhirowa kuenda kune yekuyedza zvikamu munguva pfupi pfupi.
Application Cases
-Under-the hood component test
-High tembiricha RTV kuumba
-Wind tunnel yekuongorora
-Kuedza kugadzirisa magetsi
-Composite autoclave tooling
-HVAC chikamu chekuongorora
-Kutora bvunzo dzakawanda
- Orthodontics
APPLICATION minda
Dzidzo
Hand Molds
Auto Parts
Packaging Design
Art Design
Medical
ZVINHU ZVINHU (LIQUID)
| Chitarisiko | chena |
| Density | 1.13g/cm3@25 ℃ |
| Viscosity | 400~480 cps @ 29 ℃ |
| Dp | 0.152mm |
| Ec | 7.6 mJ/cm2 |
| Kuvaka layer ukobvu | 0.05 ~ 0.12mm |
?
MACHANICAL PROPERTIES (POST-CURED)
| Kuyera | Test Method | Value | |
| 90-miniti UV mushure mekurapa | 90-maminetsi UV +2 maawa@160℃ yekupisa post-kurapa | ||
| Kuoma, Shore D | ASTM D 2240 | 87 | 91 |
| Flexural modulus, Mpa | ASTM D790 | 2678-3186 | 3502-3631 |
| Flexural simba, Mpa | ASTM D790 | 60-80 | 90-101 |
| Tensile modulus, MPa | ASTM D 638 | 2840-3113 | 3484-3771 |
| Kusimba simba, MPa | ASTM D 638 | 58-67 | 50-62 |
| Elongation panguva yekuzorora | ASTM D 638 | 4-8% | 4-6% |
| Impact simba, notched lzod, J/m | ASTM D 256 | 18-30 | 16-23 |
| Heat deflection tembiricha, ℃ | ASTM D 648 @66PSI | 81 | 98 |
| Girazi shanduko, Tg, ℃ | DMA, E'peak | 100 | 111 |
| Coefficient yekuwedzera kwekupisa, E6/℃ | TMA (T | 79 | 86 |
| Thermal conductivity, W/m.℃ | 0.171 | ||
| Density | 1.24 | ||
| Kutorwa kwemvura | ASTM D 570-98 | 0.49% | 0.46% |
?
Mechanical Properties yePost-Cured Material
| CHIYERO | TEST NZIRA ? | ? | VALUE |
| ? | ? | 90-miniti UV mushure mekurapa | 90-maminitsi UV +2 maawa@160℃thermalpost-cure |
| Kuoma, Shore D | ASTM D 2240 | 87 | 91 |
| Flexural modulus, Mpa | ASTM D790 | 2678-3186 | 3502-3631 |
| Flexural simba, Mpa | ASTM D790 | 60-80 | 90-101 |
| Tensile modulus, MPa | ASTM D 638 | 2840-3113 | 3484-3771 |
| Kusimba simba, MPa | ASTM D 638 | 58-67 | 50-62 |
| Elongation panguva yekuzorora | ASTM D 638 | 4-8% | 4 -6% |
| Impact simba, notched lzod, J/m ? | ASTM D 256 ? | 18~30 ? | 16~23 |
| Heat deflection tembiricha,℃ ? | ASTM D 648 @66PSI ? | 81 | 98 ? |
| Girazi shanduko,Tg ,℃ | DMA,E”peak ? | 100 | 111 ? |
| Coefficient yekuwedzera kwekupisa, E6 /℃ | TMA(T） ? | 79 ? | 86 ? |
| Thermal conductivity, W/m.℃ | ? | 0.171 | ? |
| Density | ? | 1.24 | ? |
| Kutorwa kwemvura | ASTM D 570-98 | 0.49% | 0.46% |
