I-Resin SZUV-T1120-ukumelana nobushushu obuphezulu
Intshayelelo ngokubanzi
Iimpawu:
I-SZUV -T1120 yintlaka ye-SL etyheli eye yasebenza ngokungafaniyo ne-thermal. Iyakwazi ukumelana namaqondo obushushu angaphaya kwe 200℃ ngexesha elifutshane kunye ne 120℃ ngexesha elide. Yenzelwe ukuphatha iindidi ezininzi zobushushu obuphezulu kunye nezicelo zovavanyo olubi.
Iimpawu eziqhelekileyo
AMANDLA OKUPHEZULU kunye nokuchasana okuhle
I-SZUV-T1120 inokumelana nokufuma, amanzi kunye nezinyibilikisi, ezifana nepetroli, ulwelo lokuhambisa, i-oyile kunye nesipholisi. Ngokumelana nokushisa okungenakulinganiswa, ifanelekile ukuhamba, i-HVAC, ukukhanya, izixhobo, ukubumba kunye nezicelo zokuvavanya itonela yomoya.
-YAKHA NGENXEKO kwaye UPHUHLISE KAKHULU
Ngokubonelela ngemveliso ekhawulezayo kunye neengxenye ezinomgangatho ogudileyo, ekulula ukuwuphatha, i-SZUV-T1120 inokugqiba iprojekthi yakho ukusuka kumzobo ukuya kwiindawo zokuvavanya ngexesha elifutshane.
Iimeko zesicelo
-Uvavanyo lwecandelo phantsi kwe-hood
-Ubushushu obuphezulu bokubumba i-RTV
-Uvavanyo lwetonela yomoya
-Uvavanyo lwezixhobo zokukhanyisa
-Izixhobo ezidibeneyo ze-autoclave
-Uvavanyo lwecandelo le-HVAC
-Uvavanyo oluninzi
-Amathambo
IINDLELA ZOKUSEBENZA
Imfundo
Izandla zokubumba
Amacandelo Auto
Uyilo lokuPakisha
Uyilo lobuGcisa
Ezonyango
IIPROPATI ZOMZIMBA (ULULEKI)
| Imbonakalo | mhlophe |
| Ukuxinana | 1.13g/cm3@ 25 ℃ |
| Viscosity | 400 ~ 480 cps @ 29 ℃ |
| Dp | 0.152mm |
| Ec | 7.6 mJ/cm2 |
| Ubungqingqwa bomaleko wokwakha | 0.05 ~ 0.12mm |
?
IIPROPATI ZOOMATSHINI (EMVA KOKUPHILA)
| Umlinganiselo | Indlela yoVavanyo | Ixabiso | |
| Imizuzu engama-90 ye-UV emva kokunyanga | Imizuzu engama-90 UV +2 iiyure@160℃ thermal post-cure | ||
| Ubunzima, Unxweme D | I-ASTM D 2240 | 87 | 91 |
| Flexural modulus, Mpa | I-ASTM D 790 | 2678-3186 | 3502-3631 |
| Amandla e-Flexural, uMpa | I-ASTM D 790 | 60-80 | 90-101 |
| Imodyuli yokuqina, iMPa | I-ASTM D 638 | 2840-3113 | 3484-3771 |
| Amandla okuqina, MPa | I-ASTM D 638 | 58-67 | 50-62 |
| Ukwandisa ngexesha lekhefu | I-ASTM D 638 | 4-8% | 4-6% |
| Amandla empembelelo, inotched lzod, J/m | I-ASTM D 256 | 18-30 | 16-23 |
| Ubushushu bokutshintsha ubushushu, ℃ | I-ASTM D 648 @66PSI | 81 | 98 |
| Utshintsho lweglasi, Tg, ℃ | DMA, E'peak | 100 | 111 |
| I-Coefficient yokwandiswa kwe-thermal, E6/℃ | TMA (T | 79 | 86 |
| I-Thermal conductivity, W/m.℃ | 0.171 | ||
| Ukuxinana | 1.24 | ||
| Ukufunxwa kwamanzi | I-ASTM D 570-98 | 0.49% | 0.46% |
?
IiPropati zoomatshini zeMathiriyeli eNcinyiweyo
| UMLINGANISO | INDLELA YOVAVANYO ? | ? | VALUE |
| ? | ? | Imizuzu engama-90 ye-UV emva kokunyanga | Imizuzu engama-90 UV +2 iiyure@160℃thermalemva kokunyanga |
| Ubunzima, Unxweme D | I-ASTM D 2240 | 87 | 91 |
| Flexural modulus, Mpa | I-ASTM D 790 | 2678-3186 | 3502-3631 |
| Amandla e-Flexural, uMpa | I-ASTM D 790 | 60-80 | 90-101 |
| Imodyuli yokuqina, iMPa | I-ASTM D 638 | 2840-3113 | 3484-3771 |
| Amandla okuqina, MPa | I-ASTM D 638 | 58-67 | 50-62 |
| Ukwandisa ngexesha lekhefu | I-ASTM D 638 | 4-8% | 4 -6% |
| Amandla empembelelo, inotched lzod, J/m ? | I-ASTM D 256 ? | 18-30 ? | 16-23 |
| Ubushushu bokutshintsha ubushushu,℃ ? | I-ASTM D 648 @66PSI ? | 81 | 98 ? |
| Utshintsho lweglasi,Tg ,℃ | I-DMA,E”incopho ? | 100 | 111 ? |
| I-Coefficient yokwandiswa kwe-thermal, i-E6/℃ | TMA(T） ? | 79 ? | 86 ? |
| I-Thermal conductivity, W / m.℃ | ? | 0.171 | ? |
| Ukuxinana | ? | 1.24 | ? |
| Ukufunxwa kwamanzi | I-ASTM D 570-98 | 0.49% | 0.46% |
